Tornamesas

[40:1 8]

Q

[hectori 761]

Esta es la Yosegi E-FLAT con brazo Plano.

EAT’s E-Flat is a new, forward-thinking turntable supplied with a revolutionary flat tonearm. Although flat arms have been seen in the past, none have been able to offer the rigidity necessary to deliver the stable performance expected of modern tonearms. Thanks to the continued evolution of carbon fibre, Forte has been able to create an arm with the practical and aesthetic benefits of a flat form, but without the weaknesses.

E-Flat’s mission is to bring to the music lover the highest quality performance, but in a user-friendly design. Ultra-flat, ultra-light and ultra-rigid, the E-Flat tonearm measures 10in long. A unipivot bearing supports the E-Flat, its fully (and easily) adjustable counterweight decoupled by energy- and vibration-absorbing Sorbothane. The E-Flat’s unipivot system is extremely precise and accurately balanced, thanks to components endowed with especially hard metal surfaces. Unwanted motion often attributed to lesser unipivot designs is eliminated by the high mass of unipivot housing and the added security of two metal guides.

A further valuable benefit is that its carbon-fibre arm “tube” can be changed by the user to address to specific cartridge requirements, with either lighter or heavier tubes to establish different arm/cartridge resonant frequencies. Adjustable anti-skating and a damped cueing lever are also fitted.

A flat arm tube opens up a number of possibilities for the designer – and the listener. Its shape encourages the design of a flatter platter with easier, visible arm levelling, and there is no taper to accommodate. With perfect integration to the unipivot design pillar, no hollow tube to suffer the inevitable echo effects or ringing, greater stiffness, a new and superior hanging counterweight design with very high damping properties, the E-Flat tonearm’s performance is truly quiet and incredibly “fast.”

This handsome and innovative arm is fitted to a turntable that adheres to the basic principles established by the existing models in the Forte family. A belt-drive design, it features two motors, like its ‘bigger sisters’. The two motors do not run in parallel, but act like a virtual 24-pole motor. The belt encircles an inner sub-platter, which is fitted with inside bearing made out of bronze bushings. The main platter rests on an inverted bearing and a ceramic ball, with a Teflon lining on the underside of the main platter.

As with the larger Forte record decks, the diameter of the platter is oversized compared to those on most competitors’ turntables. 33cm was chosen because the moving mass is twice that of a standard 30cm platter. Forte fits a vinyl mat made of recycled LP records to create a surface with properties sympathetic to the LPs it supports. The platter is filled underneath with Sorbothane to stop resonance, while Sorbothane is also used to damp the bearing housing, tonearm base and magnetic feet. In addition to the isolation provided by the magnetic feet, the bearing assembly and platter aperture are suspended. Also in common with the dearer Forte turntables, the Forte E-Flat exhibits an ideal balance between mass-loading and thoughtful subchassis design.

[hectori 761]

hace 19 horas, Giuseppe55 dijo:

 Y  esta belleza..................Thorens TD 145 MKII

 

Nada que envidiarle a esta Td150 que está en venta ahora mismo...

[Giuseppe55 685]

hace 29 minutos, hectori dijo:

Nada que envidiarle a esta Td150 que está en venta ahora mismo...

El Mk.II tiene un brazo  Isotrack Tp-16Mk.II más nuevo que la TD145

[ChristianSur 496]

Roksan Radius 5.2

 

[Mr_oD 3.303]

En este canal de YT siempre aparecen cosas interesantes cono esta Sharp RP-117. 

 

[hectori 761]

Otra joya...

De un artículo de las Capsulas TOPWING  http://www.topwing.jp/index.html

https://www.monoandstereo.com/2018/04/top-wing-seiryu-blue-dragon-cartridge.html?m=1

 

[i prefer analogues 456]

hace 2 horas, hectori dijo:

Otra joya...

De un artículo de las Capsulas TOPWING  http://www.topwing.jp/index.html

https://www.monoandstereo.com/2018/04/top-wing-seiryu-blue-dragon-cartridge.html?m=1

 

La puta que lo parió 

[tomate 129]

Que el módulo del motor esté separado del módulo del plato no me parece complejo, pero que lo esté el del brazo! Pienso en la dificultad en mantener la calibración de manera estable. Tornamesas para zonas asísmicas.

Habrá que tener un segundo protractor para posicionar los módulos sobre el rack.

No olvidar: menos es más

Editado June 9, 2018 at 13:40 por tomate

[Giuseppe55 685]

Thorens TD 226

[Giuseppe55 685]

otra Belleza..!!

Referance 1979

[dokoo40 402]

Esta torna esta bellísima

Enviado desde mi iPhone utilizando Tapatalk

[Mr_oD 3.303]

Le pediré a mi sra que me haga esta TT, es algo más real de poder tener, que alguna de las que se publican acá 

Editado July 19, 2018 at 20:43 por Mr_oD

[Perse0 0]

On 28/9/2016 at 11:46 AM, ZHAR said:

... conocía el dicho pero así: "Tengo mas pega que maraca nueva".

El instrumento musical?

[Patagonia 739]

 

Esta Garrard me encantó

 

[jbl-fan 261]

Aterrizando el voyerismo vinílico...   por esas cosas del destino...  llegaron dos a mi salita de audio...  Revox B790...

 

[alexthor 79]

Esta es la Yosegi E-FLAT con brazo Plano.

EAT’s E-Flat is a new, forward-thinking turntable supplied with a revolutionary flat tonearm. Although flat arms have been seen in the past, none have been able to offer the rigidity necessary to deliver the stable performance expected of modern tonearms. Thanks to the continued evolution of carbon fibre, Forte has been able to create an arm with the practical and aesthetic benefits of a flat form, but without the weaknesses.

E-Flat’s mission is to bring to the music lover the highest quality performance, but in a user-friendly design. Ultra-flat, ultra-light and ultra-rigid, the E-Flat tonearm measures 10in long. A unipivot bearing supports the E-Flat, its fully (and easily) adjustable counterweight decoupled by energy- and vibration-absorbing Sorbothane. The E-Flat’s unipivot system is extremely precise and accurately balanced, thanks to components endowed with especially hard metal surfaces. Unwanted motion often attributed to lesser unipivot designs is eliminated by the high mass of unipivot housing and the added security of two metal guides.

A further valuable benefit is that its carbon-fibre arm “tube” can be changed by the user to address to specific cartridge requirements, with either lighter or heavier tubes to establish different arm/cartridge resonant frequencies. Adjustable anti-skating and a damped cueing lever are also fitted.

A flat arm tube opens up a number of possibilities for the designer – and the listener. Its shape encourages the design of a flatter platter with easier, visible arm levelling, and there is no taper to accommodate. With perfect integration to the unipivot design pillar, no hollow tube to suffer the inevitable echo effects or ringing, greater stiffness, a new and superior hanging counterweight design with very high damping properties, the E-Flat tonearm’s performance is truly quiet and incredibly “fast.”

This handsome and innovative arm is fitted to a turntable that adheres to the basic principles established by the existing models in the Forte family. A belt-drive design, it features two motors, like its ‘bigger sisters’. The two motors do not run in parallel, but act like a virtual 24-pole motor. The belt encircles an inner sub-platter, which is fitted with inside bearing made out of bronze bushings. The main platter rests on an inverted bearing and a ceramic ball, with a Teflon lining on the underside of the main platter.

As with the larger Forte record decks, the diameter of the platter is oversized compared to those on most competitors’ turntables. 33cm was chosen because the moving mass is twice that of a standard 30cm platter. Forte fits a vinyl mat made of recycled LP records to create a surface with properties sympathetic to the LPs it supports. The platter is filled underneath with Sorbothane to stop resonance, while Sorbothane is also used to damp the bearing housing, tonearm base and magnetic feet. In addition to the isolation provided by the magnetic feet, the bearing assembly and platter aperture are suspended. Also in common with the dearer Forte turntables, the Forte E-Flat exhibits an ideal balance between mass-loading and thoughtful subchassis design.

Csm, brazos intercambiables de carbono planos, holy shiy

Enviado desde mi POCOPHONE F1 mediante Tapatalk

[Eduardo Bentjerodt 106]

Como dice Tomate "menos es más"  aquí hay buen ejemplo de eso

 

[Ricardo Figueroa 87]

 Hermosa...la quiero, ahora!...jajaja

[maguilarp 1.488]

On 1/5/2018 at 16:49, ChristianSur dijo:

Roksan Radius 5.2

 

Puta que me arrepiento no haber comprado una de estas, las últimas estuvieron de oferta muy baratas (sin brazo). Traía montura compatible para brazos Rega 😭